1. Lietuvoje
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1720, Teal, 457 mm x 23 m, 0.5 mm

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1720, Teal, 457 mm x 23 m, 0.5 mm

3M ID YP208010857
  • Teal, flexo plate mounting tape with air release feature adhesive
  • This 0.020 inch (0.51 mm) teal, medium firm density, double coated foam tape has the air release feature adhesive with easy plate side removal.
  • Cushioned flexographic plate mounting sticky back tape
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More
View all details
Product Details

Provides high quality, medium-firm combination print. The adhesives remove cleanly from the print plate and the print cylinder.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1720 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for work where you have slightly more solids in a combination of solid and halftone printing. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

  • Teal, flexo plate mounting tape with air release feature adhesive
  • This 0.020 inch (0.51 mm) teal, medium firm density, double coated foam tape has the air release feature adhesive with easy plate side removal.
  • Cushioned flexographic plate mounting sticky back tape
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Backing Thickness (Metric)
0.559 Millimetre
Composite Sleeves
Yes
NPVI Mktg
Yes
Overall Length (Metric)
22.86 m
Overall Width (Metric)
457.2 mm
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Firm
Print Quality (Series)
17 Series
Product Color
Teal
Product Form
Roll
Total Tape Thickness without Liner (Metric)
0.56 Millimetre
Urethane Sleeves
Yes