3M™ Speedglas™ Welding Helmet 9100 FX Air, with filter 9100X and supplied air regulator 3M™ Versaflo™ SAR V-500E

• Combined face, eye and respiratory protection
• Comes with 3M™ Speedglas™ Welding Helmet 9100 FX-Air, 9100X welding filter and 3M™ Versaflo™ Supplied Air Regulator V-500E
• Nominal protection factor 200 (3B)
• 3M™ Speedglas™ Welding Filter 9100X offers variable dark shades of 5, 8 and 9-13 for most types of arc welding
• Welding filter viewing area: 54 mm x 107 mm
• Protective visor viewing area: 170 mm x 100 mm
• Delay settings allow you to extend the recovery delay of the welding filter from dark to light, according to welding method
• Light-to-dark switching time of 0.1 ms
• 3M™ Versaflo™ Supplied air Regulator V-500E is balanced, belt-worn and easy to adjust with consistent airflow delivery
• Airflow level adjustable between 170 l/min and 305 l/m
• Airline supply must be air of breathable quality in order to meet EN 12021 requirements
• Oil, mist, water vapour or non-toxic and unpleasant odours in the air supply can be removed with air cleaning station such as 3M™ Aircare™ Filtration System ACU-03 (wall mounted) or ACU-04 (stand-alone)

System 3M™ Speedglas™ Welding Helmet 9100 FX-Air, with welding filter 9100X and 3M™ Versaflo™ Supplied Air Regulator V-500E, 548815 offers eye, face and respiratory protection with a flip-up welding filter combined with a big (170 mm x 100 mm), clear protective visor.

For respiratory protection and excellent vision in a flip-up model, get 3M™ Speedglas™ Welding Helmet 9100 FX Air, with welding filter and 3M™ Versaflo™ Supplied Air Regulator V-500E, 548815. Our welding helmet has a flip-up welding filter 9100X (54 mm x 107 mm) with a wide, clear (170 mm x 100 mm) visor beneath that’s excellent for precision grinding in low-light conditions. 3M™ Speedglas™ Welding Filter Series 9100 continues our tradition of outstanding optical quality, including uniform shading and minimal distortion across the entire filter viewing area. The welding filter 9100X has seven variable dark shades (5, 8 and 9-13) for most types of arc welding and a viewing area of 54 mm x 107 mm, made for the professional welder. A delay function sets the welding filter dark-to-light opening time, and it’s possible to lock-in any shade, e.g. in light state 3 when grinding. It has a switching time (light-dark) of 0.1 ms, and the sensitivity of the arc detection can be adjusted for reliable switching. The tack welding comfort mode may help reduce eye fatigue as the welding filter uses an intermediate shade 5 light state to help minimize eye strain during extended tack welding applications. If an arc is not struck within 2 seconds the welding filter will switch back to its normal light state (shade 3). The welding helmet features side windows (shade 5) which can help widen the field of vision when wearing in the down position. Our Versaflo supplied air regulator V-500E is a balanced, belt-worn, easy-to-adjust regulator that consistently delivers the airflow at the level you set, from 170 l/min to 305 l/min. To meet EN 12021 requirements, the airline supply must be air of breathable quality. For further comfort and protection, oil mist, water vapour or non-toxic and unpleasant odours in the air supply can be easily removed with an air cleaning station, such as 3M™ Aircare™ Filtration System ACU-03 (wall mounted) or ACU-04 (stand-alone). Please note, supplied air regulators with heating or cooling (V-100E/V-200E) are available as alternative regulator (only as separate order – not as system).

Suggested Applications

• Use for welding applications