1. Lietuvoje
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H, 457 mm x 23 m

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H, 457 mm x 23 m

3M ID YP208011715
  • Yellow, flexo plate mounting tape with air release feature with high plate side adhesion
  • This 0.020 inch (0.51 mm) yellow, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
  • Cushioned flexographic plate mounting sticky back tape
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More
View all details
Product Details

Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for high speed printing of combination work when halftone areas exceed solids. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

  • Yellow, flexo plate mounting tape with air release feature with high plate side adhesion
  • This 0.020 inch (0.51 mm) yellow, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
  • Cushioned flexographic plate mounting sticky back tape
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Composite Sleeves
Yes
Overall Length (Metric)
23 m
Overall Width (Metric)
457 mm
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Soft
Print Quality (Series)
13 Series
Product Color
Yellow
Total Tape Thickness without Liner (Metric)
0.51 Millimetre
Urethane Sleeves
Yes